Safety

- Mini bell with quick release mount - Unique bracket that tightens by simply applying pressure with finger - Exceptional sound/travel for its size - Fits 19mm to 26.4mm handlebar diameters

Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Aluminum bell with a 360-degree, ribbed lever.

Aluminum bell with ribbed lever NOTE: 22.2mm diameter clamp. This bell will only fit smaller-diameter handlebars.

Hit the lever once, it rings twice! Sleek and small aluminum bell. - Sound Volume: 87.0dB - Handlebar size: 22.2mm - Bell Diameter: 33mm - Weight: 27g

Tool-free mount attaches quickly to handlebars 19-32 mm. Aluminum 30mm diameter bell can also be mounted with a light or computer FlexTight™ bracket. - Sound Volume: 90.0dB - Handlebar size: 22-32mm - Bell Diameter: 33mm - Weight: 25g

- Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

- 1.5" diameter convex mirror for wide viewing angle - Mounts left or right side - Self-adhesive mounting base with detachable arm - Telescoping arm adjusts from 5" to 8" - Mirror rotates 360°

- Complete, high quality bicycle reflector set - Includes 1x RR-165-BPR Rear reflector (red), 1 x RR-165-BP2W front reflector (white) and 2x RR-550N-WUW wheel reflectors (white) - Also includes brackets to mount on most seatposts and handlebars

- Set of 12 highly reflective wheel stickers - High-grade, German-engineered reflective vinyl - Weatherproof: will last at least 7 years in harsh outdoor conditions - Compatible with 26'', 27.5'', 29'' and 700c wheels and all rim materials - Rim brake wheels require at least 10mm below the rim brake track for proper installation - Available in black or white - Lightweight (5g)

CatEye's FlexTight bell may be tiny but it packs a huge ding to let everyone know you're coming.

Fits 22-25.4mm Handlebars

- 3" diameter convex mirror for wide viewing angle - Mount left or right side - Perfect for MTB, hybrid, or commuter handlebars - Bar end mount adjusts to fit 15-22mm inner diameter - Swing arm offers full range adjustment on 3 axes and folds for storage/transport

- 3" diameter convex mirror for wide viewing angle - Mount left or right side - Perfect for MTB, hybrid, or commuter handlebars - Bar end mount adjusts to fit 15-22mm inner diameter - Easy adjustment with 3 pivot points

Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

- Lightweight - Easy to install (suggested for left side) - Stays in place

Reversible helmet mirror. Compatible with any helmet, the Z Eye is ideal for touring and leisure use. - 360° rotation mirror - Mounting: Universal with velcro straps - Convex mirror - Weight: 20g

- Retractable handle bar end mirror - Mounting: Universal bar end fitting

Ideal rearview mirror for straight and straight curved handlebars. The Dooback II mirror can be folded away and is ideal for leisure or city use whilst also being compatible with e-Bikes. The mirror is very large and is made in France using an unbreakable material. - Multi-position rearview mirror, now with larger 56cm² surface - Universal bar end mounting - Fully adjustable - Foldable - Shatterproof ABS chrome - Extra-wide and convex for a wider field of view and increased security - Made in France

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

- Multi position mirror - Universal bar end mounting - Fully adjustable with 3 angle rotation - Folds on impact - Extra large and convex unbreakable chrome plated ABS mirror face: better peripheral vision.

- Suitable for most bicycle frame styles. - Due to the clear dong sound, you're always audible to other road users. - This large bicycle bell is suitable for permanent attachment to the steering axis of your bicycle. - 80mm

- Bell diameter: 60mm

- Bell diameter: 60mm

- Durable all steel trigger bell - Polka dot pattern - Bell diameter: 80mm

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.